Technical Specification - CONFIDENTIAL - Page 6 of 21
DESKO ICON Scanner
®
Doc # 7 001 140 101 Doc.-Rev.: 2016-11-09
3. Features of the ICON Scanner
3.1 Technical Features of the ICON Scanner
• 5 megapixels high quality image sensor (resolution up to 600 dpi)
• Visible, IR and UV-A light source
• Dual RFID antenna with full NFC support
3.2 Key Features of the ICON Scanner
The ICON Scanner focuses on passport and ID card reading in order to achieve the quickest
read results and image capture while maintaining a high resolution scan quality.
3.2.1 Optical Character Recognition (OCR) Reader
The integrated ICAO document reader is capable of reading and decoding OCR data with a
read rate of at least 99 % from the following documents:
• Passport data from machine readable passports and identification cards according
to ISO/IEC 7501-1 and ICAO 9303
• Personal OCR encoded travel documents e.g. Visa and crew member cards
according to ICAO 9303
(Additional document types can be supported upon request.)
MRZ reading time is in average around 0.5 seconds for ICAO 9303 compliant documents.
OCR data output is in standard readable format, depending on PC system and application.
3.2.2 RFID & NFC Reading
The integrated RFID Module is a dual antenna design especially designed for passport
reading. The RFID module is able to read RFID documents according to ISO 14443 (A/B),
ISO 7816 (incl. US passport), and ICAO 9303.
RFID ePassport reading for BAC takes an average around 1.5 seconds, depending on the PC
system and application.
Generally, the type of ePassport/e-ID can also influence RFID reading performance. This is
due to different chip sets and OS in various ePassport/e-ID document types. RFID ePassport
reading speed may therefore vary from document to document.
To Next Page
Loading...
