Technical Specification - CONFIDENTIAL - Page 14 of 21
DESKO ICON Scanner
®
Doc # 7 001 140 101 Doc.-Rev.: 2016-11-09
8 Service
If the scanning window is dirty from fingerprints, stain or dust, it can slow down the
scanning performance and affect the accuracy of scanning.
8.1 Clean glass window
1. Turn off the ICON Scanner.
2. Clean the glass with a soft cloth or sponge slightly moistened with a non-abrasive
glass cleaner.
3. Dry the glass with a chamois or cellulose sponge to prevent spotting.
8.2 Clean housing
1. Turn off the ICON Scanner.
2. Clean the housing with a soft cloth or sponge slightly moistened with a non-
abrasive, solvent free cleaner.
3. Dry the housing with a chamois or cellulose sponge to prevent spotting.
9 Maintenance
In general, DESKO products are maintenance free. However, should you require any
technical assistance, please contact our support team at support@desko.com
.
To Next Page
Loading...
