2.2 95-871434
MODEL DESCRIPTION
LS2000 Line of Sight Infrared Gas Detector
TYPE MATERIAL
S Stainless Steel
TYPE CONDUIT ENTRY THREAD TYPE
N 3/4" NPT, 4 Port Receiver, 2 Port Transmitter
M Metric M25, 4 Port Receiver, 2 Port Transmitter
TYPE OUTPUT
00 None (Transmitter only)
18 4-20 mA, RS485, HART (Receiver or Kit)
25 4-20 mA, RS485, HART w/Optional Relays (Receiver or Kit) – Ex d only
TYPE RANGE
N None (Transmitter only)
S Short Range, 5-60 Meters (Receiver or Kit)
L Long Range, 30-120 Meters (Receiver or Kit)
TYPE FACTORY SET TARGET GAS*
N None (Transmitter only)
M Methane (Receiver or Kit)
TYPE APPROVALS
†
S SIL
A FM/CSA
TYPE CLASSIFICATION
1 Division and/or Ex d e
2 Division and/or Ex d
TYPE CONFIGURATION
S Transmitter/Receiver/Mounting Hardware
T Transmitter Only
R Receiver Only
TM Spare Transmitter Electronics Module
RM Spare Receiver Electronics Module
*The LS2000 is factory calibrated to Methane, Propane, and Butane gas types. This selection indicates which gas type the device
was configured to detect when it left the factory. This selection can be changed in the field via HART or MODBUS.
†
Type Approvals can use one or more letters to designate the approvals of the product.
NOTE: “Kit” is a complete system, consisting of a transmitter, receiver, aperture, and mounting hardware.
To Next Page
Loading...
