Det-Tronics LS2000 - Appendix A - FM Approval Description

33 95-87142.2
oRdERinG infoRmation
When ordering, please refer to the LS2000 Model
Matrix:
ALIGNMENT EQUIPMENT
Part Number Description
012287-002 LS2000 Alignment Tool
Consists of a 32mm sighting
device with 3-9x zoom
magnifier that is factory
assembled with precision
holder and reflective mirror.
ACCESSORIES
Part Number Description
012094-001 Short Range Aperture Kit —
Aluminum
012673-001 System Test Films (set of 5
films)
103922-001
Model 475 HART handheld
communicator
009246-001 Low Range Gas Test Cell
009246-002 High Range Gas Test Cell
012354-001 3/4” NPT Stopping plugs
012351-001 M25 Stopping plugs
012353-001 M25/M20 Reducer
012312-001 Transmitter Brow
012300-001 Receiver Brow
SPARE PARTS
Part Number Description
102740-002 Calibration Magnet
005003-001 Silicone Free Grease (1 oz.)
107427-079 O-Ring, 3.75” i.d., for wiring
compartment cover
107427-083 O-Ring for front flange
(internal) Transmitter
107427-067 O-Ring for front flange
(internal) Receiver
400525-023 M8 Flange Bolt
012660-001 Spare Mounting and
Alignment Bracket (for one
LS2000 module only)
103578-001 Anti-seize Lubricant Packet
ASSISTANCE
For assistance in ordering a system to meet the
needs of a specific application, contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: det-tronics@det-tronics.com