2.2 95-871436
RESPONSE TIME
T90: 2 seconds (5.0 LFL-meters applied).
NOTES
Approval of the LS2000 does not include or imply approval of the apparatus to which the
detector may be connected and which processes the electronic signal for eventual end use. In
order to maintain an approved system, the apparatus to which the detector is connected must
also be approved.
This Approval does not include or imply Approval of the communications protocol or functions
provided by the software of this instrument or the communications apparatus or software
connected to this instrument.
The LS2000 may be used with FM Approved PointWatch Termination Box Model PIRTB Series.
Accessories with the following part numbers are approved for use with the LS2000:
012094-001 Short Range Aperture Kit
012287-XXX LS2000 Alignment Tool
009246-002 Gas Test Cell
012673-001 System Test Film
012351-001 M25 Stopping Plug
012354-001 3/4 NPT Stopping Plug
012353-001 M25/M20 Reducer
012312-001 Transmitter Brow
012300-001 Receiver Brow
012660-001 Mounting Bracket
103922-001 HART Handheld Communicator
011824-001 MODBUS Program
102740-002 Calibration Magnet
To Next Page
Loading...
