Deutz 1015 - Engine Specifications and Settings; Engine Model Specifications; Engine Performance and Cooling Data; Lubrication and Fuel System Specs

9
Number of cylinders 6 8 6 8
Cylinder arrangement 90° Vee-angle
Bore [mm] 132
Stroke [mm] 145
Total displacement [cm
3
] 11906 15874 11906 15874
Compression ratio [ε]17
Working cycle / combustion system 4-stroke TC engine/direct injection
Direction of rotation counter-clockwise
Weight incl. cooling system [approx. kg] Consult headquarters
Weight w/o cooling system acc. to DIN 70020-A [approx. kg] 830 1060 830 1060
Engine power [kW] 190-240
1
) 250-320
1
) 228-300
1
) 304-400
1
)
Speed [rpm]
1
)
Valve clearance, engine cold
5)
[mm] inlet 0.25
+ 0,1
/ exhaust 0.3
+ 0,1
Injector opening pressure [bar] 290 bar
Commencement of delivery [°CA BTDC]
1
)
Firing order 1-6-3-5-2-4 1-8-4-5-7-3-6-2 1-6-3-5-2-4 1-8-4-5-7-3-6-2
A1-B3-A3-B2-A2-B1 A1-B4-A4-B1-B3-A3-B2-A2 A1-B3-A3-B2-A2-B1 A1-B4-A4-B1-B3-A3-B2-A2
V-belt tension: tension / retension
2
)
Alternator 55 amperes [N] 450 / 200-350
± 50
Alternator 120 amperes [N] 550 / 300-450
± 50
Specification Data 9.1 Engine Specifications and Settings
1)
Engine power, speed, commencement of delivery, etc. are stamped on the rating plate, see 2.1.
2)
Retension after running for 15 minutes under load.
Model 1015 BF6M 1015 BF8M 1015 BF6M 1015 C/ CP BF8M 1015 C / CP
9
Cooling system liquid-cooled / cooling system protection
Coolant quantity [approx. lit.] 17
+ MFK*
21
+ MFK*
17
+ MFK*
21
+ MFK*
Perm. cont. coolant temperature engine outlet [°C] max.103
Temperature difference between
coolant inlet / outlet [°C] max.5
Thermostat starts opening at [°C] 87
±2
Thermostat fully open from [°C] 102
Coolant pump
Delivery pressure in [bar]
4
)
Delivery rate in [m
3
/h] 22,5
4)
30
4)
22,5
4)
30
4)
Lubrication forced-feed lubrication
SAE oil (see 4.1) 15 W 40
Min. oil pressure with engine warm (120 °C)
at low idle / rated speed [bar] 1,0
Oil capacity (initial filling) without filter [approx. lit.] 34
3)
45
3)
34
3)
45
3)
Oil capacity (initial filling) engine-mounted filter [approx. lit.] 36*
3)
47*
3)
36*
3)
47*
3)
Oil capacity (initial filling), separate filter [approx. lit.] 38
3)
50
3)
38
3)
50
3)
9.1 Engine Specifications and Settings Specification Data
Model 1015 BF6M 1015 BF8M 1015 BF6M 1015 C/ CP# BF8M 1015 C// CP#
3)
Approximate figures can vary depending on the design. Decisive is always the upper dipstick mark.
4)
3 bar at engine speed n = 2100 rpm
-1
5)
see 6.1.1 (# only synthetic lube oil, see.4.1.2.1)
*
MFK
Engine radiator
Property of American Airlines