Devantech dS2824 User Manual

dS2824
dS2824 User Manual v4.12
dS2824
dS2824
User Manual Version 4.12
Copyright © 2016-2021, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
1

Devantech dS2824 Specifications

General

Communication Interface	I2C
Operating Voltage	5V DC
Coil Voltage	5V DC
Relay Type	SPDT
Maximum Switching Voltage	250 VAC, 30 VDC
Switching Voltage	250 VAC, 30 VDC

Summary

Getting started

Locating the IP Address

Configuring the dS2824

Status page

Network page

Webpage security

TCP/IP page

Configuring relays

Relay automation

Input/Output configuration

Connecting I/O to Virtual Relays

dSx Configuration

dSx Mapping Table

Details the mapping of dSx module outputs and inputs to the dS2824 relays and virtual relays.

dSx Example

Sequencer

Sequencer Commands

Explains the various commands used to control the dS2824 sequencer, including delays and jumps.

Sequencer Examples and Outputs

Illustrates sequencer usage for input monitoring and traffic light control.

Schedules

Counter/Timers

Event Notifications

Peer to Peer

Email notifications

Pinging remote machines

The application page

Application Page Security

Details how to secure the application webpage, controlling access to the module.

Accessing your webpage from the internet

Boolean equations

ASCII Command Set

Binary Command Set

AES Binary Command Set

Modbus Commands

Loading the application firmware

Erasing old configuration settings

dS2824 hardware

LED Indication, Power Supply, and Operating Temperature

Details the device's LEDs, power requirements, and operational temperature range.

Analogue/Digital Flexible I/O Overview and Examples

Describes the eight flexible I/O ports, their configuration, connection examples, and schematics.

Sensor and Input Details

Details the on-board temperature sensor, power supply voltage measurement, and analogue channel specifications.

Serial Port Connections

Details the TTL and RS485 serial port specifications and connectivity.

dS2824 dimensions