dS2824
dS2824 User Manual v4.12
A quick look
Ethernet connected module, 10/100Mb auto negotiated.
Relays – 24 x 16Amp 250Vac C/O.
I/O – 8 x flexible I/O's NPN output, Volt free input or 12-bit analogue input.
Power – 12VDC 1.5Amp supply required. 2.1mm center positive.
Connections – Screw Terminals for N/O N/C and Common contacts
PCB size – 249mm x 123mm
Controlled graphically by secure webpage or optionally one of ASCII, Binary or Modbus com-
mand sets over TCP/IP.
Email notifications – 8 selectable notifications, up to 100 emails/hour max.
Peer to Peer – Control relays on other modules.
Notifications – Sends a message when selected I/O change state.
Line powered (up to 300 meter range) extension modules.
Sequencer – Flexible 100 step, 12 output sequencer
Schedules – Able to schedule events based on time of day/week
Counter/Timers – Count or time events. 10 counts/second Max.
Also available when optionally programming in dScript is a TTL level serial port and an RS485
serial port.
Copyright © 2016-2021, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
5
To Next Page
Loading...
Need help?
General
