dS2824
dS2824 User Manual v4.12
Application page security
The configuration pages (any page name starting with _config) are only served when the USB
port is connected. If the USB port is unplugged then no configuration pages are served. In-
stead, you will be served a page saying “You do not have permission to view this page.”
The _pw.htm page (which contains the javascript that loads the password into your browser)
will only be served when the enable _pw.htm checkbox is checked on the Webpage Security
tab.
If the password field is left blank, the application page will always be served – to anyone!
Entering a password means the application page will only be served to a browser that has the
matching password set. Everyone else will just just be served a simple webpage saying “You
do not have permission to view this page.”
To summarize, set a password, load it onto your browser, disable _pw.htm and un-plug the
USB cable. Now you, and only you, can access and control your module.
Copyright © 2016-2021, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
47
To Next Page
Loading...