dS2824
dS2824 User Manual v4.12
from loading the password. When the “Update Pending” light goes out re-boot the module
again.
The default port used by html webpages is 80. You can change this if required. If you do so
then you will need to include the port number in the address.
If you change the port to 2345 then the webpage will be at:
YourIP:2345/index.htm
For example:
192.168.0.123:2345/index.htm
Copyright © 2016-2021, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
14
To Next Page
Loading...
Need help?
General
