dS2824
dS2824 User Manual v4.12
Here's a very simple example:
Enter R2 into the Relay 1 Pulse/Follow box. This will make relay 1 copy whatever you do to Re-
lay 2. Try it!
Now change it to !R1.
The exclamation mark is read as “Not R1”. Now relay 1 will always be the opposite of relay 2.
Try it.
Boolean equations may be used for controlling relays and other objects such as email.
See the “Boolean equation” section later in this manual for full documentation.
Copyright © 2016-2021, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
19
To Next Page
Loading...
Need help?
General
