Selecting registered transmission source information
5
5-14 ineo+ 220/280/360 (Version 3)
5.4
Reference
- The transmission source information is specified in Administrator mode. Check with the machine’s
administrator for the administrator password.
- The transmission source information is registered by the administrator. Check with the machine’s
administrator for registered information.
- The administrator can set the position for printing the transmission source information on the outside
or inside of the document or it can be set to not be printed.
d Reference
For details, refer to chapter 10 of the [User’s Guide Network Scan/Fax/Network Fax Operations].
To Next Page
Loading...
