ineo+ 220/280/360 (Version 3) 5-17
5.6 Sending documents with a command from the recipient
5
5.6 Sending documents with a command from the recipient
Polling transmission
Saving the data for scanned documents on the sender’s machine and sending it with a request from the
recipient is called "polling transmission".
A document sent using this machine’s "Polling TX" function is stored in this machine’s Polling Transmission
User Box and is sent when a request is received from the recipient.
Request for
data to be sent
Receiver
Sender
Polling
Transmission
User Box
To Next Page
Loading...
