ineo+ 224/284/364/454/554 6-5
6
[IP Address Fax]
To display: [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address Book
(Public)] - [IP Address Fax] - [New]
Enter any of the IP address, host name or E-mail address of the destination.
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].
- To change the settings for a registered destination, select its registered name, then tap [Edit].
- To delete a registered destination, select its registered name, then tap [Delete].
Settings Description
[No.] Destination registration number. [No.] is automatically registered from a
lower number that is not used. If you want to specify a number, tap [No.]
and enter the number within the range of 1 to 2000.
[Name] Enter the destination name to be displayed on the Touch Panel (using up
to 24 characters).
Assign a name that helps you easily identify the destination.
[Sort Character] Enter the same one as the registered name (using up to 24 characters).
You can sort destinations by registration name.
[Index] Select a corresponding character so that the destination can be index-
searched by registration name.
• If an alphabet character is specified for the initial of a registration name,
search text is automatically specified with the alphabet character. If an-
ything other than alphabet character is specified for the initial of a reg-
istration name, [etc] is specified by default.
• For a frequently used destination, also select [Favorites]. If [Favorites]
is selected, the destination will appear in the main screen in fax/scan
mode, enabling the user to easily select a destination.
[Destination] Enter a destination IP address or host name.
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
• Example of host name entry: "host.example.com" (Including a domain
name.)
You can also specify a destination by E-mail address. To specify a desti-
nation by E-mail address, enter the destination IP address or host name
following "ipaddrfax@".
To enter an IP address following the @ symbol, put the IP address in brack-
ets "[ ]".
• Example of IP address (IPv4) entry: "ipaddrfax@[192.168.1.1]"
To use an IP address (IPv6), enter "IPv6:" following the left bracket "[ ".
• Example of IP address (IPv6) entry: "ipaddr-
fax@[IPv6:fe80::220:6bff:fe10:2f16]"
To enter a host name following the @ symbol, brackets "[ ]" are unneces-
sary.
• Example of host name entry: "ipaddrfax@host.example.com"
[Port Number] If necessary, change the port number.
In normal circumstances, you can use the original port number.
[25] is specified by default.
[Destination Machine Type] Select whether the recipient machine supports color printing.
[Monochrome] is specified by default.
To Next Page
Loading...
