Develop ineo+ 224 - Change the From Address; Registering and Changing Addresses; Restrict Operation

ineo+ 224/284/364/454/554 7-9
7
[Registering and Changing Addresses]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Registering and Changing Addresses]
Select whether to allow the user to register or change destinations.
[Allow] is specified by default.
[Change the "From" Address]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Change the "From" Address]
Select whether to allow the user to change sender E-mail address ("From" address).
[Restrict Operation]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Operation]
Specify items for which access is restricted.
[Change Registered Over-
lay]
Select whether to allow the user to overwrite or delete a registered overlay
image.
For details, refer to [User's Guide: Copy Operations].
[Biometric/IC Card Info.
Registration]
Select whether to allow the user to register or delete a user's biometric or
Card authentication information.
For details, refer to [User's Guide: Copy Operations].
[Synchronize User Authen-
tication & Account Track]
Specify whether to allow users to change the settings for synchronizing
user authentication and account track when user authentication and ac-
count track are enabled.
For details, refer to [User's Guide: Copy Operations].
Settings Description
Settings Description
[Allow] Allow the user to change the "From" address.
[Allow] is specified by default (without user authentication).
[Administrator E-Mail Ad-
dress]
Prohibit the "From" address from being changed and use the administra-
tor's E-mail address.
[Login User Address] Prohibit the "From" address from being changed and use the user's E-mail
address. Administrator's E-mail address is used if user's E-mail address
has not been registered.
[Login User Address] is specified by default (with user authentication).
Settings Description
[Restrict Broadcasting] Select whether to prohibit the user from sending faxes to multiple destina-
tions. To prohibit broadcast, select [ON].
[OFF] is specified by default.