6
6-12 ineo+ 224/284/364/454/554
[Default Address Method]
To display: [Utility] - [User Settings] - [Custom Display Settings] - [Scan/Fax Settings] - [Default Address
Method]
Select the list order of destinations to be displayed in [Address Book] between registration number and reg-
istration name.
If you select the registration name, destinations are sorted according to [Sort Character] specified for the des-
tinations.
[Number Order] is specified by default.
[Default Address Display Method]
To display: [Utility] - [User Settings] - [Custom Display Settings] - [Scan/Fax Settings] - [Default Address Dis-
play Method]
Select the display in [Address Book] between button and list.
[One-touch Button Layout] is specified by default.
[Function Display Key(Send/Save)]
To display: [Utility] - [User Settings] - [Custom Display Settings] - [Function Display Key(Send/Save)]
Change the function key to be displayed on the main screen in fax/scan mode and the send or save settings
screen in the User Box mode.
Select a function key number, and specify the function to assign.
The following shows the default functions.
- [Function Key 1]: [Simplex/Duplex]
- [Function Key 2]: [Resolution]
- [Function Key 3]: [Color]
- [Function Key 4]: [File Type]
- [Function Key 5]: [Scan Size]
- [Function Key 6]: [E-mail Settings]
- [Function Key 7]: [OFF]
Tips
- The above functions can be configured when you are allowed to change a function key by the admin-
istrator.
[Search Option Settings]
To display: [Utility] - [User Settings] - [Custom Display Settings] - [Search Option Settings]
Configure the contents of the search screen when performing an detail search for registered destinations.
Settings Description
[Uppercase and Lower-
case Letters]
Select whether to distinguish between upper and lower case alphabet
characters when searching for a registered destination.
[Differentiate] is specified by default.
[Search Option Screen] If you want to change the setting of [Uppercase and Lowercase Letters]
when searching for a destination, select [ON].
If you select [ON], the check box for switching the setting is displayed in
the [Name Search] and [Address Search] screen respectively.
[OFF] is specified by default.
To Next Page
Loading...
