Develop ineo+ 224 - Activity Report; Tx Result Report

ineo+ 224/284/364/454/554 7-29
7
[Activity Report]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Activity Report]
Set the printing conditions for a report containing results of faxes sent and received.
[TX Result Report]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [TX Result Report]
Select when to print a report containing the results of fax transmission.
[TX Result Report Check] Select whether to display a screen that asks whether you want to print a
TX Result Report each time a fax is sent.
For details, refer to page 7-30.
[Network Fax RX Error Re-
port]
Select whether to print a report if the machine has failed to receive an In-
ternet fax or IP address fax.
For details, refer to page 7-30.
[MDN Message] Select whether to print a report notifying that an Internet fax has been sent
to the recipient machine.
For details, refer to page 7-30.
[DSN Message] Select whether to print a report notifying that an Internet fax has been sent
to the mail server of the recipient machine.
For details, refer to page 7-30.
[Print E-mail Message
Body]
Select whether to print a report notifying that an Internet fax has been suc-
cessfully received after it was received. The report has the subject and
message text of an Internet fax.
For details, refer to page 7-30.
Settings Description
Settings Description
[ON]/[OFF] Specify whether to print an activity report.
[ON] is selected by default.
[Output Setting] To print it, select when to print it.
• [Daily]: Prints an activity report at the time specified in [Output Time
Settings] every day.
• [Every 100 Comm.]: Prints an activity report every 100 communica-
tions.
• [100/ Daily]: Prints an activity report at the time specified in [Output
Time Settings] every day. In addition, a report is printed for every 100
communications.
[Every 100 Comm.] is specified by default.
[Remark Column Print Set-
up]
Specify whether to print user or account name in the remarks column of
the activity report if user authentication or account track is enabled on this
machine.
• [Normal Printing]: Prints the line status or sending settings.
• [User Name Printing]: Prints the user name for user authentication.
• [Account Name Printing]: Prints the account name for account track.
[Normal Printing] is specified by default.
Settings Description
[ON] The report is printed every time a fax has been transmitted.
[If TX Fails] The report is printed if a fax transmission has failed.
[If TX Fails] is specified by default.
[OFF] The report is not printed.