ineo+ 224/284/364/454/554 2-9
2.3 How To Send A Fax
2
4 Configure the option settings for fax transmission as necessary.
% For details on configuring option settings, refer to the respective columns of the following table.
5 Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press Reset.
Transmission begins.
% If you press the Stop key while scanning an original, the scanning stops, and a list of stopped jobs
appears. To cancel scanning of the original, delete the job from the list of inactive jobs.
Tips
- When an Internet fax is sent, the TX result report is printed. With the TX result report, you can check for
successful fax transmission.
- When the recipient machine receives an Internet fax, an MDN message that provides notification of suc-
cessful reception is printed on this machine. You can check whether the fax has been successfully re-
ceived by reading the MDN message.
Related setting
- You can change the default options for scan transmission to suit your environment. For details, refer to
page 6-14.
Purpose Reference
To configure basic options such as color and original size page 1-19
To configure options to scan various types of originals such as various sizes
and books
page 1-21
To adjust the image quality level of the original such as colored background
(newspaper, etc.) or light printing original
page 1-25
To print date/time and page number page 1-26
Other option settings page 1-28
To Next Page
Loading...
