9-26 ineo+ 360i/300i/250i
When a message appears to replace consumables or carry out cleaning
9
9.4
9.4.6 About hole-punch scraps
When the punch scrap box is full, a message appears to prompt you to dispose of the punch scraps (at re-
placement by user). Take action while referring to the label inside the machine.
Punch scrap processing (for Finisher FS-539/Finisher FS-539 SD)
- The figure shows the Finisher FS-539 SD equipped with Punch Kit PK-524 and Relay Unit RU-513.
To Next Page
Loading...
