ineo+ 360i/300i/250i 1-9
1.4 Regulation notices
1
1.4 Regulation notices
About certified model name
This product is certified by the following model name in Europe:
DEVELOP branded model C302302 (ineo+ 360i, ineo+ 300i and ineo+ 250i).
For other countries than the above, this product is certified by the following model names:
DEVELOP branded model ineo+ 360i, ineo+ 300i and ineo+ 250i.
CE Marking (Declaration of Conformity) for users of the European Union (EU)
Hereby, Konica Minolta declares that the radio equipment models specified above are in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
"https://www.develop.eu/en/support/download-centre.html".
Choose your product and open the section "Safety Documents".
7WARNING
- This device must be used with a shielded interface cable. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under EU directives.
If IC-420 is installed:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Maximum radio-frequency power transmitted in the frequency band (EIRP):
Note: 5 GHz may not be available
This radio equipment is restricted to indoor use only. Outdoor use is prohibited.
This restriction applies to all the countries listed in the table below.
Module Name, Option Frequency Band Radiation. Power
UK-221 includes approved
Wireless module, MODEL
WN4521L:
2.4 GHz Max. 20 dBm
5 GHz Max. 23 dBm
EK-609 includes approved
Wireless module, MODEL
MBH7BLZ02:
2.4 GHz Max. 3 dBm
AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
RO SE SI SK TR UK
To Next Page
Loading...
