Develop ineo+ 364 - Header Position; Line Parameter Setting; Tti Print Position and Character Size

ineo+ 224/284/364/454/554 7-23
7
[Header Position]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Header/Footer Position] - [Header Position]
Specify the position at which a Header Position is printed on a fax.
[TTI Print Position and Character Size]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Header/Footer Position] - [TTI Print Position
and Character Size]
Select the size of characters to print a Header Position.
Tips
- If [Normal] is selected for the scanning resolution for sending a fax, it is converted into [Normal] to pre-
vent characters from becoming corrupted and unreadable.
[Footer Position]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Header/Footer Position] - [Footer Position]
Select whether to print Footer Position (date, time, and reception number) on faxes received by this machine.
To print them, select the position to print the Footer Position.
[Line Parameter Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting]
Configure the environment to use fax functions on this machine, such as the types of telephone lines (dialing
method) and fax receive mode.
Settings Description
[Inside Body Text] Prints the sender information inside the original image. Part of the original
image may be cut off.
[Outside Body Text] Prints the sender information outside the original image.
[Outside Body Text] is selected by default.
[OFF] Prints nothing for sender information.
Settings Description
[Normal] Prints the sender information in the normal text size.
[Minimal] Reduces the text height by half of the size set with [Normal]. It is recom-
mended that you select [Minimal] to prevent a fax image from being cut off
or to prevent a page from being divided when pages are printed at a receiv-
ing machine.
[Minimal] is selected by default.
Settings Description
[Inside Body Text] Prints Footer Position inside the original image. Part of the original image
may be cut off.
[Outside Body Text] Prints Footer Position outside the original image.
[OFF] Prints no Footer Position.
[OFF] is specified by default.
Settings Description
[Dialing Method] Select the line type according to your environment.
For details, refer to [User's Guide: Fax Operations].
[Receive Mode] Select a receive mode.
For details, refer to [User's Guide: Fax Operations].
[Number of RX Call Rings] If necessary, change the number of times the phone rings before automat-
ically receiving a fax.
For details, refer to [User's Guide: Fax Operations].