Develop ineo+ 364 - Splitting a Custom Size (Portrait) Fax for Printing ([Print Separate Fax

Receiving Options
2
2-16 ineo+ 224/284/364/454/554
2.5
Splitting a custom size (portrait) fax for printing ([Print Separate Fax Pages])
For faxes that are longer in the longitudinal direction than the standard size, the print size is not reduced, how-
ever the area that cannot be fitted to a standard size is printed on the subsequent page.
For details on how to configure the settings, refer to page 7-26.
Tips
- If [Min. Reduction for RX Print] is set to [Full Size], [Print Separate Fax Pages] is compulsory switched
to [OFF], and the area that cannot be fitted on a standard size sheet is not printed at all.
- If [Duplex Print (RX)] is [ON], you cannot use [Print Separate Fax Pages].