Develop ineo+ 364 - Network Fax Settings; Color;Grayscale Multi-Value Compression Method

ineo+ 224/284/364/454/554 7-31
7
[Network Fax Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Network Fax Settings]
Change default settings on Internet Fax or IP Address Fax environment and compression type of send data.
[Black Compression Level]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Network Fax Settings] - [Black Compression
Level]
Change default settings on the compression type for sending data in black and white if you are using the In-
ternet Fax or IP Address Fax function.
[Color/Grayscale Multi-Value Compression Method]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Network Fax Settings] - [Color/Grayscale Mul-
ti-Value Compression Method]
Change default settings on the compression type for sending data in full color or gray scale if you are using
the Internet Fax or IP Address Fax function.
Tips
- Data is converted to the compact PDF format using the technique unique to this machine.
Settings Description
[Black Compression Level] Change default settings on the compression type for sending data in black
and white if you are using the Internet Fax or IP Address Fax function.
For details, refer to page 7-31.
[Color/Grayscale Multi-Val-
ue Compression Method]
Change default settings on the compression type for sending data in full
color or gray scale if you are using the Internet Fax or IP Address Fax func-
tion.
For details, refer to page 7-31.
[Internet Fax Self RX Abili-
ty]
This machine notifies its reception capability when returning a MDN mes-
sage if you are using the Internet Fax function. Change the reception ca-
pability of this machine which is notified upon returning a MDN message
as necessary.
For details, refer to page 7-32.
[Internet Fax Advanced
Settings]
Configure settings for fax reception confirmation (MDN/DSN) to be sent by
this machine if you are using the Internet fax function.
For details, refer to page 7-32.
[IP Address Fax Operation
Settings]
Select the operation mode of this machine if you are using the IP Address
Fax function.
For details, refer to page 7-33.
Settings Description
[MMR] The data size is the smallest.
[MMR] is specified by default.
[MR] The data size is intermediate between [MH] and [MMR].
[MH] The data size is larger than [MMR].
Settings Description
[JPEG (Color)] Compress image data in color JPEG format.
[JPEG (Color)] is specified by default.
[JPEG (Gray Scale)] Compress image data in black-and-white JPEG format.
[Not Set] Compress data according to the compression type specified in [Black
Compression Level]. You cannot send data in color or gray scale.
Whichever file format you specify, data is converted to the TIFF format.