DS2400Q QAM Analyzer Operation Manual
DEVISER 105 DS2400Q
4. Please replace the battery when its working
hours shorten distinctly.
5.2 Charging
Please charge the instrument as following
charging process:
1. Insert the charger output plug to DS2400Q’ DC
charge socket.
2. Connect the charger to AC 100V-240V Power
and the charger indicator will light with red.
3. When indicator become to green, the
instrument has been fully charged(It is
suggested to charge another one hour after
indicator change to green. This way can
extend the battery life). Then you can
disconnect the charger input plug with power
and pull out the charger output plug.
To Next Page
Loading...
