DS2400Q QAM Analyzer Operation Manual
DEVISER 28 DS2400Q
and are used for switching channels
circularly. If the next channel is analogue channel,
the screen will be displayed as figure 3-3-5.
SAVE( ): Press this button to save the result of
level test ,refer to 3.13.2.
FREQ( ): Press this button into frequency
measurement interface as figure 3-3-14, In this
mode, the user can easily modify the central
frequency, but the other parameters of digital
channel will be the same as channel mode, press
this button again to return.
To Next Page
Loading...
