Introduction 13
devolo dLAN 1200+ WiFi ac
Note the WiFi key of the dLAN 1200+ WiFi ac
before the networking procedure. You will find
the adapter's unique key (WiFi key) on the label
on the back of the housing.
In order to connect the dLAN 1200+ WiFi ac to
your laptop, tablet or smartphone later via WiFi,
enter the noted WiFi key as the network securi-
ty key.
쎲 In order to switch WiFi off, press and hold the
WiFi button longer than 3 seconds.
쎲 In order to switch WiFi back on, tap the WiFi
button.
Connecting WiFi devices via WPS
쎲 If the device is still on factory defaults, tap the
WiFi button in order to activate WPS.
쎲 If the WiFi connection was switched off and
you would like to activate WPS, press the
WiFi button twice; once to switch WiFi on, and
again to activate WPS.
WPS is one of the encryption standards devel-
oped by the WiFi Alliance for increasing security
in a WiFi network. The objective of WPS is to
make it easier to add devices to an existing net-
work. For more detailed information, refer to
Chapter 5.3.7 Wi-Fi Protected Setup (WPS).
Indicator lights
The integrated indicator lights (LEDs) show the WiFi
status for the dLAN 1200+ WiFi ac by illuminating
and/or flashing:
쎲 When the WiFi connection is switched off, the
LED is also off.
쎲 When a WiFi connection is switched on, the LED
lights up white.
쎲 White flashing and illumination behaviour
쑗 The LED lights up when there is a connection
to the WiFi network.
쑗 The LED flashes briefly during WPS pairing.
2.3.3 Network jacks
The two network jacks can be used to connect comput-
ers or other network devices to the
dLAN 1200+ WiFi ac via commercially available net-
work cables.
2.3.4 Reset
The reset button (next to the network jacks) has two
different functions:
쎲 The device restarts if you press the Reset button
for less than 10 seconds.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
