14 Introduction
devolo dLAN 1200+ WiFi ac
쎲 To change the configuration of the
dLAN 1200+ WiFi ac back to the factory
defaults, press the Reset button for more than
10 seconds. Keep in mind that all settings that
have already been configured will be lost!
You can use a pointed object (such as a paper
clip) to press the reset button.
2.3.5WiFi antennas
The internal WiFi antennas are for connecting to other
network devices wirelessly.
2.3.6 Integrated electrical socket
If you connect additional network devices using a pow-
er strip, plug this power strip into the electrical socket
of the dLAN 1200+ WiFi ac. The integrated mains filter
eliminates any noise of connected devices and signifi-
cantly improves data transmission in the network.
To Next Page
Loading...
