22 Network configuration
devolo GigaGate
4 Network configuration
The devolo GigaGate has a built-in configuration inter-
face that can be called up using a standard web brows-
er. All settings for operating the device can be modified
here.
4.1 Calling up the built-in
configuration interface
This enables you to access the built-in online configu-
ration interface for the devolo GigaGate:
쎲 Open your operating system's start menu and
select devolo Cockpit software. Click the corre-
sponding devolo GigaGate entry to go to the con-
figuration interface of the device.
Then the program determines the current IP address
and starts the configuration in the web browser.
You can find more information on
devolo Cockpit software in Chapter 3.4 Instal-
lation of devolo software.
By default, the configuration interface will
open directly. However, if a login password
was set using the option Management
(adjacent symbol) Device security, you
have to enter this first.