Preface 7
devolo GigaGate
Disconnect devolo devices from the mains
supply to clean! Avoid cleaning agents containing
solvents, since they can cause damage to the housing.
Only use a dry towel for cleaning.
DANGER due to overheating
devolo devices should be installed only at locations
that guarantee adequate ventilation. Slots and open-
ings on the housing are used for ventilation:
쎲 Do not cover devolo devices during operation.
쎲 Do not place any objects on devolo devices.
쎲 Do not insert any objects into the openings of
devolo devices.
쎲 devolo devices must not be placed directly next
to a naked flame (such as fire or candles).
쎲 devolo devices must not be exposed to direct
heat radiation (e.g. radiator, direct sunlight).
DANGER due to overheating
The housing of the device can get hot during
operation. Make sure that your device is in-
stalled so that it is protected from being
touched.
1.2 devolo on the Internet
For detailed information on our products and dLAN,
visit www.devolo.com
. The WiFi area not only
contains product descriptions and documentation, but
also updates to devolo software and your device's
firmware.
If you have any further ideas or suggestions related to
our products, please don't hesitate to contact us at
support@devolo.com
!