36 Network configuration
devolo GigaGate
WPS via PBC (push button) (WiFi button):
햲 Start the encryption process on the
devolo GigaGate
쑗 either by pressing the WiFi button on the
front panel of the devolo GigaGate Satel-
lite or
쑗 by going into the interface under
devolo GigaGate Satellite Mobile
devices Terminal devices, automatic
(WPS) WPS via PCB (Push Button) and
pressing the Start setup button.
햳 Then either press the WPS key of the WiFi device
you are adding or enable the WPS mechanism in
the WiFi settings of the WiFi device. Now the
devices exchange their security keys and establish
a secure WiFi connection. The WiFi LED on the
front panel indicates the synchronisation process
by flashing.
WPS via PIN:
햲 To interconnect WiFi devices in your wireless net-
work securely by means of PIN variants, enter an
individualised key in the configuration interface
under devolo GigaGate Satellite Mobile
devices Terminal devices, automatic (WPS)
WPS via PIN and start the encryption process
by pressing the Start setup button.
햳 Open the configuration interface of the WiFi sta-
tion to be added and transmit the PIN selected on
the devolo GigaGate Satellite. Confirm the
encryption process as described there. Now the
devices exchange their security keys and establish
a secure WiFi connection. The WiFi LED on the
front panel indicates the synchronisation process
by flashing.
Deactivating WPS encryption
쎲 Terminal devices, automatic (WPS)
쑗 Wi-Fi Protected Setup (WPS) on/off
You can enable or disable the WPS encryption of your
devolo GigaGate.