Devolo Magic 1 User Manual

29 Network configuration
devolo Magic 1 WiFi
2-1
4 Network configuration
The devolo Magic 1 WiFi
2-1
has a built-in web in-
terface that can be called up using a standard web
browser. All settings for operating the device can
be modified here.
4.1 Calling up the built-in web
interface
You can access the built-in online web interface for
the devolo Magic 1 WiFi
2-1
in different ways:
b Using the devolo Home Network App on your
smartphone or tablet, you can access the
device's web interface by tapping on the corre-
sponding adapter symbol for the
devolo Magic 1 WiFi
2-1
.
or
b Using the Cockpit software, you can get to the
device's web interface by clicking on the corre-
sponding tab for the devolo Magic 1 WiFi
2-1
.
Then the program determines the current IP
address and starts the configuration in the web
browser.
By default, the web interface will open di-
rectly. However, if an access password has
been set via the option System  Manage-
ment, you have to enter that password first.
Read more about this under 4.7 System.
You can find more information on
devolo Home Network App and Cockpit
software in Chapter 3.4 Installation of de-
volo software.
4.2 General information about
the menu
All menu functions are described in the correspon-
ding interface as well as in the associated chapter
in the manual. The sequence of the description in
the manual follows the structure of the menu. The
figures for the device interface serve as examples.
Logging in
The web interface is not password protected. As-
signing a login password is mandatory when log-
ging in for the first time to prevent unauthorised
access by third parties.

Devolo Magic 1 Specifications

General

Frequency Band	2.4 GHz
Powerline Networking	Yes
Encryption	128-bit AES
Ethernet LAN data rates	10, 100 Mbit/s
Wi-Fi standards	802.11n
Security algorithms	WPA2
Maximum Data Rate	300 Mbps
Ports	Ethernet
Maximum Powerline Data Rate	1200 Mbit/s