Devolo Magic 1 User Manual

49 Network configuration
devolo Magic 1 WiFi
2-1
sary, devolo offers new versions on the Internet as
a file download, for example to modify existing
functions.
Current firmware
The currently installed firmware of the
devolo Magic 1 WiFi
2-1
is displayed here.
Searching for and updating firmware
automatically
The adapter
can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The devolo Magic 1 WiFi
2-1
lets you know
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The devolo Magic 1 WiFi
2-1
automatically
updates its firmware. The option is enabled
by default.
Download updated firmware
1 If you have downloaded an updated firm-
ware file for the devolo Magic 1 WiFi
2-1
to
your computer, navigate to the System 
Firmware  Update firmware area. Click
Browse … and select the downloaded file.
2 Confirm the update procedure with Update
firmware. After a successful update, the
devolo Magic 1 WiFi
2-1
restarts automatically.
Ensure that the update procedure is not inter-
rupted.
4.7.5Config Sync
Config Sync allows settings to be configured uni-
formly for all devolo Magic devices in the network.
This includes the following settings e.g.:
b WiFi network
b Guest network
b Mesh WiFi
b Time control and time server settings.
In order to switch Config Sync on, activate the
Enable option.
Please note that the WiFi is always switched
on or off for the entire network. Therefore,
stop Config Sync first on a device that you
want to configure or switch separately.

Devolo Magic 1 Specifications

General

Frequency Band	2.4 GHz
Powerline Networking	Yes
Encryption	128-bit AES
Ethernet LAN data rates	10, 100 Mbit/s
Wi-Fi standards	802.11n
Security algorithms	WPA2
Maximum Data Rate	300 Mbps
Ports	Ethernet
Maximum Powerline Data Rate	1200 Mbit/s