Devolo Magic 1 User Manual

37 Network configuration
devolo Magic 1 WiFi
2-1
You can also enable or disable the guest ac-
count in the devolo Home Network App
using the Guest account button.
Frequency band
In the Frequency band field, you select the fre-
quency band mode you are using (see Chapter
WiFi network mode).
Network name
Define the name of the guest network in the Net-
work name field.
Key
You should also encrypt the guest account to pre-
vent anyone in signal range from intruding into
your network and, for example, sharing your Inter-
net connection. The WPA/WPA2/WPA3 (WiFi
Protected Access) security standard is available for
this.
This method allows for individualised keys consi-
sting of letters and numbers with a length of up
to 63 characters. You can simply enter them via
the keyboard.
To do so, enter a corresponding number of cha-
racters into the Key field.
QR code
Using the QR code, you can conveniently set up the
connection to the guest network for mobile de-
vices. Scanning the QR code automatically trans-
fers the credentials for the guest network to the
respective mobile device. The QR code is visible
only if the guest network has been enabled.
4.4.4Mesh
Mesh
All devolo Magic series WiFi adapters offer mesh
WiFi, which entails completely new and improved
WiFi functions:
b Fast roaming (IEEE 802.11r) streamlines the
registration process for WiFi end devices, such
as smartphones or tablets, when switching to
another WiFi hotspot.
The feature Fast roaming is not compatible
with all WiFi clients. If there will be
connection problems with one of your
devices, please deactivate these option.
In factory default condition of the
devolo Magic 1 WiFi
2-1
Fast roaming is turned off
by default.

Devolo Magic 1 Specifications

General

Frequency Band	2.4 GHz
Powerline Networking	Yes
Encryption	128-bit AES
Ethernet LAN data rates	10, 100 Mbit/s
Wi-Fi standards	802.11n
Security algorithms	WPA2
Maximum Data Rate	300 Mbps
Ports	Ethernet
Maximum Powerline Data Rate	1200 Mbit/s