Dexter Laundry A Series User Manual

78
8514-300-001 REV PR
1. “Pre-Wash”- If the user programs a “Cycle Time” for “Pre-Wash” other than 0 (“No
Cycle”), the feature becomes active. However, the customer will not be prompted to pay
an additional vend price for “Pre-Wash” unless the user programs the Price to a value
other than 0 (“Free”). With the “Pre-Wash” feature active, an additional bath and,
optionally, an additional spin, will occur before the standard Wash bath described in the
Cycles Options section.
With the “Pre-Wash” feature active and a “Price” value programmed, the customer will
be prompted to add additional coins if they wish to purchase the “Pre-Wash” feature.
This will occur after they have entered coins to meet the Base Vend price. If the
customer does not meet the vend price of the “Pre-Wash” feature, the prompt will time
out and the “Pre-Wash” bath will not occur.
2. “Extend Wash”- If the user programs an “Extend Time” for “Extend Wash” other than 0,
the feature becomes active. However, the customer will not be prompted to pay an
additional vend price for “Extend Wash” unless the user programs the Price to a value
other than 0 (“Free”).
With the “Extend Wash” feature active, the standard Wash bath described in the Cycles
section will be extended for the additional time selected. With the “Extend Wash”
feature active and a “Price” value programmed, the customer will be prompted to add
additional coins if they wish to purchase the “Extend Wash” feature. This will occur after
they have pressed the “Start” button to begin the normal Wash cycle. If the customer
does not meet the vend price of the “Extend Wash” feature, the prompt will time out
and the additional time will not be added to the Wash bath.
3. “Extra Rinse”- If the user programs a “Cycle Time” for “Extra Rinse” other than 0 (“No
Cycle”), the feature becomes active. However, the customer will not be prompted to pay
an additional vend price for “Extra Rinse” unless the user programs the Price to a value
other than 0 (“Free”).
With the “Extra Rinse” feature active, an additional bath and, optionally, an additional
spin, will occur after the standard “Final Rinse” bath described in the Cycles Options
section. With the “Extra Rinse” feature active and a Price value programmed, the
customer will be prompted to add additional coins if they wish to purchase the “Extra
Rinse” feature. This prompt will occur during the standard “Final Rinse” bath. If the
customer does not meet the vend price of the “Extra Rinse” feature, the prompt will
time out and the “Extra Rinse” bath will not occur.
4. “SuperWash” – If the user programs SuperWash to “On”, the feature becomes active.
However, the customer will not be prompted to pay an additional vend price for
“SuperWash” unless the user programs the Price to a value other than 0 (“Free”). With
the “SuperWash” feature active, any combination of the “Pre-Wash”, “Extend Wash”, or
“Extra Rinse” features, of which that are also active, will be automatically implemented
during the cycle. No additional prompting for vend will occur for the individual features
during the cycle. For example, if “Pre-Wash”, “Extra Rinse”, and “SuperWash” options
are active and “SuperWash” price is met, the “Pre-Wash” and “Extra Rinse” features will
automatically occur during the cycle. The control will not prompt for “Extra Rinse” vend
at the normal prompting time of the cycle.

Dexter Laundry A Series Specifications

General

Brand	Dexter Laundry
Model	A Series
Category	Washer
Language	English