Maintenance Manual LS4
Issued: May 2011
Copyright DG Flugzeugbau GmbH - any copy or publishing prohibited
Manual valid with the up-to-date cover page only
Removal and installation of seat shell LS4-b cont.
4.3.2.2 Seat shell installation LS4-b
Follow disassembly steps in reverse order, in addition observe the
following:
- Inspect seat area for foreign matter, tools etc.
- Rest right side of seat on support, direct control stick into cutout and
pedal adjuster cable into guide, place air brake handle into rearward
position
- Screw T-shaped handle to pedal adjuster cable and use pliers to prevent
rotation of the cable end fitting.
- Connect release cable pulley cage to mounting at pedal support.
- Check control system after installation for proper operation.
Check especially function of release system: hook opening completely
as well as clearance at T-shaped handle with landing gear down and
locked.
To Next Page
Loading...