EasyManua.ls Logo

DGSHAPE DWX-53DC - Page 15

DGSHAPE DWX-53DC
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Insta
llatio
n
Warning
The pressure of compressed air shall be 1.0 MPa or less.
Exceeding this value may cause a serious accident such as an explosion.
Warning
The compressed air to be supplied shall be free from water, oil, chemicals, and foreign matter.
Parts may deteriorate and rupture, or contaminants may scatter and cause damage.
Warning
Do not supply compressed air until the air hose is securely connected.
Otherwise, an unexpected accident may occur.
PREPARATION TO USE THE MACHINE
Compressor (compressed air supply source)
This machine requires compressed air. A compressor must be prepared separately.
Prepare a compressor that meets the following conditions.
Control pressure: within 0.5 to 1.0 MPa
Air flow: 66 L/min or more (per unit)
Oil-free type (Dislike intrusion of foreign matter into compressed air.)
With dryer (Moist air may cause rust.)

Related product manuals