Important
•
Ensure that the driver is installed prior to connecting the aircraft to the computer with USB cabling.
•
1 To connect multiple units to a single computer, see "Connecting multiple units".
•
Use only USB cabling that came with the camera.
•
When connecting a conversion cable, prepare a separate USB cable of 3m or less in total including the
conversion cable. If the total length of the cable exceeds 3m, a malfunction may occur.
•
Do not use USB hubs. You may not be able to connect.
•
Do not bundle power cords with USB cords. If USB cable and the power cord are bundled together,
malfunction may result due to noises, etc.
Connect to a computer
Necessary items
Procedure
1.
If the aircraft's power switch is off, turn it on.
The aircraft will begin initial operation when the power switch is turned on. The initial operation is complete
when the status light changes from blinking to solid.
2.
Connect the aircraft to the computer with USB cabling.
To Next Page
Loading...
