Warning
Install the unit in a place that is level, stable, and capable of withstanding the weight of the unit.
The total weight of the instrument is more than 120 kg . Failure to do so may result in a serious accident such as a fall,
fall or collapse.
Warning
Do not install the product in a place exposed to fire.
Otherwise, it may ignite the machining scrap. Powdery things are very combustible and can burn even if they are
metal.
Warning
Do not install the product near flammable materials or in a place filled with gas.
Failure to do so may result in a fire or explosion.
Warning
Do not install the product outdoors, in a place exposed to water, or in a place with high humidity.
Electric leakage may cause electric shock or fire.
Warning
Keep the power plug easily accessible at all times.
This is for quick disconnection of the power plug in case of emergency. Install the equipment near the power
outlet. Also, leave enough space for the power cord to be brought into close proximity to the outlet.
Installation location
•
Do not install the product in a location subject to large changes in temperature and humidity.
•
Do not install the product in a place subject to shaking or vibration.
•
Do not install the product in a dusty location.
•
Do not install the product in direct sunlight or near heating and cooling equipment.
•
Do not install the product in a location where there is a lot of electrical or magnetic noise, such as electromagnetic
waves.
•
Do not install the product in an atmosphere containing silicone-based substances (oil, grease, spray, etc.).
Failure to do so may cause contact failure of the switch or malfunction of the ionizer.
To Next Page
Loading...
