DV 20 E AFM
Normal Operating
Procedures
Doc. No. 4.01.25-E Rev. 2 22-Mar-2022
EASA
approved
Page 4 - 3
4.3 CHECKLISTS FOR NORMAL OPERATING PROCEDURES
4.3.1 DAILY CHECK
Before the first flight of a day it must be ensured that the following checks are performed:
1. Check of the canopy for cracks and major scratches.
2. Inspection of the locking bolts for proper movement with no backlash.
3. Check tire inflation:
Main wheels: 2.3 bar (33 PSI)
Nose Wheel: 1.8 bar (26 PSI)
4. Check the spinner and its attachment (including screws).
5. Engine Master ....................... Check OFF
6. Electric Master ....................... Check OFF
7. Open the two inspection covers on the cowling.
8. Check coolant level in expansion tank.
NOTE
The inspection window must be covered with coolant.
9. Check coolant level in the overflow bottle.
NOTE
The coolant level must be between the MIN and MAX
marking.
To Next Page
Loading...
