OPERATOR’S MANUAL
PM300, PM332, PM400 Planter Monitors
11001-1372-201702 Rev B
50 / TROUBLESHOOTING
SELF-TEST ALARM
Probable Cause
1. Faulty sensor or harness
2. Console failure
Corrective Action
1. Trigger sensor and observe troubleshooting LED. If sensor does not
have LED, swap harness connection with adjacent sensor to
determine if sensor or harness is damaged. Replace sensor or
harness.
2. Console is damaged. Contact your dealer, DICKEY-john USA
(1-800-637-3302) or DICKEY-john Europe (011-33-141-192189).
To Next Page
Loading...
