11
12. SELECTING WATERING FREQUENCY
This controller has three operation methods of activating programs A, B, or C. This
setting determines how often the controller will operate with each program. After
selecting the program, choose either program according to the days of the week, a
cyclical irrigation cycle, which waters once every certain number of days (i.e. once
every 3 days is a cyclical cycle) and even or odd days.
To see the option in each program, press
and the following modes will appear:
OFF, Weekly mode
, next, cyclic mode with 1-30 days, and last, ODD or
EVEN modes
.
Weekly Program Example: Program the controller to operate on Wednesday,
Thursday, Friday an Saturday.
Turn the
to WEEKLY/CYCLIC mode.
If not in a weekly mode
, press and select the weekly mode, arrow under
M (Monday) and
appears. Press to skip Monday and Tuesday, the arrow
will disappear and will reappear flashing under Wednesday. To select Wednesday,
press
and the arrow remain fixed.
Press
again, the arrow skips to Th (Thursday) and remain fixed. Press
to skip F (Friday), the arrow will disappear and will reappear flashing under Sa
(Saturday). Press
, the arrow under Sa (Saturday) remains fixed. Repeat the
same steps to select Su (Sunday) and move to next step START TIME.
To Next Page
Loading...
