Digi ConnectCore - Page 139

ConnectCore for i.MX51
©2011DigiInternational,Inc. 139
The following table shows the WLAN DC parameters.
The following table shows the PMIC_GPO DC parameters.
The following table shows the PMIC_PWRON DC parameters.
The following table shows the PMIC_STDBY DC parameters
.
Parameter Symbol Min Typ Max Unit
Supply Voltage VDD 3.0 3.3 3.6 V
High-level output voltage Voh 2.4 - VDD V
Low-level output voltage Vol - - 0.4 V
High-level input voltage VIH 2 - 5.5 V
Low-level input voltage VIL -0.3 - 0.8 V
Input Leakage Current I1K - - 10
µA
Parameter Symbol Min Typ Max Unit
Supply Voltage VDD 2.5 2.775 3.1 V
High-level output voltage Voh VDD-0.2 - VDD V
Low-level output voltage Vol - - 0.2 V
Output driver impedance Rout 200 - 500
Ω
Parameter Symbol Min Typ Max Unit
Supply Voltage VDD - 1.5 3.1 V
High-level input voltage Vih 1 - VDD V
Low-level input voltage Vil - - 0.3 V
Input pull-up impedance Rup - 200 - k
Ω
Parameter Symbol Min Typ Max Unit
High-level output voltage Voh 1 - 3.6 V
Low-level output voltage Vol - - 0.3 V
Input pull-down impedance Rdw - 36 - M
Ω
Downloaded from Elcodis.com electronic components distributor