Name: Digi TransPort WR41
Brand: Digi
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Hardware features TransPort WR11 hardware features

Digi TransPort® Routers User Guide

TransPort WR11 LTE-MIMO

1. LAN port: Connects the device to a 10/100 base-T Local Area Network (LAN). The port can

perform auto-sensing for speed and wiring, so it can accept straight-through or cross-over

cable connections.

2. Power connector: This locking power connector connects the device to a power source. The

connector should be inserted and rotated to lock in place. Center pin is positive.

3. LEDs:

n SERVICE LED: Indicates the presence and level of cellular service running on the device.

Off: No cellular service

1 Blink: GPRS mode

2 Blinks: EDGE mode

3 Blinks: UMTS mode

4 Blinks: HSDPA mode

5 Blinks: HSUPA mode

6 Blinks: LTE mode

n SIGNAL LED: Indicates strength of cellular signal.

Off: Poor or No signal. Place the device in a location where it gets a better

signal.

Amber: Fair

Green: Good

n POWERLED:

Off: No power

Green: TransPort device is powered

Other manuals for Digi TransPort WR41

Questions and Answers:

Need help?

Do you have a question about the Digi TransPort WR41 and is the answer not in the manual?

General