Digi TransPort WR41 - Manage PPP Connections

Managing networks and connections Manage connections
Digi TransPort® Routers User Guide
875
Manage PPP connections
ÉWeb
Go to Management >Connections > PPPConnections > PPPn. PPPconnection status fields and
controls are as follows:
Raise Link
Activates the PPPconnection.
Drop Link
Deactivates the PPPconnection.
Link status
The current status of the PPP connection.
Uptime
The uptime for the PPPconnection.
MRU
The maximum receive unit (MRU) for the local and remote ends of the PPPconnection.
ACCM
The Asynchronous Control Character Map (ACCM) bit settings for the local and remote ends of the
PPPconnection.
VJ Compression
Whether Van Jacobson TCP/IP header data compression is on or off.
Link Active With Entity
The entity with which the PPP connection is active.
IPAddress
The IPaddress of the local end of the PPPconnection.
DNSServer IPAddress
The IPaddress of the DNS server for the PPPconnection.
Secondary DNSServer IPAddress
The IPaddress of the secondary DNS server for the PPPconnection, if any.
Outgoing Call To
Identifies the destination of the outgoing call for the PPPconnection.
Command line
Use the pppstat n command, where n is the PPP interface number (0-19).