Digi TransPort WR41 - Equivalent Routing Entry; Virtual Routing Entry

Configuring IP routing and forwarding Configure Virtual Routing and Forwarding (VRF)
Digi TransPort® Routers User Guide
463
Attribute
name Attribute description Scheme
Polling
interval
Destination
IP Subnet
Final destination IP subnet IPCore Configuration
Next Hop
IP Address
Next hop IP address IPCore Configuration
Type Route entry type
(Null, Other, Invalid, Direct, Indirect, Static)
IPCore Configuration
Routing
Protocol
Type
Routing protocol type
(Null, Other, Local, Network Managed, ICMP, EGP, GGP,
Hello, RIP, IS-IS, ES-IS, Cisco IGRP, BBN, SPF, IGP, OSPF,
BGP, EIGRP)
IPCore Configuration
Outgoing
Interface
Name
Outgoing IP interface name IPCore Configuration
Equivalent routing entry
The Equivalent Routing Entry and Virtual Routing Entry objects describe a routing table’s entries. Each
is an array of Virtual Routing Entries sharing a single IP Subnetwork destination.
Attribute
name Attribute description Scheme
Polling
interval
Routing
Entries
Array of Virtual Routing Entries sharing a single
destination
IPCore Configuration
Virtual routing entry
Attribute
name Attribute description Scheme
Polling
interval
Next Hop
BGP
Address
Next hop Border Gateway Protocol (BGP) IP address IPCore Configuration
Incoming
and
Outgoing
Inner Label
Incoming and outgoing inner MPLS label IPCore Configuration
Outer
Label
Outer MPLS label IPCore Configuration
Destination
IP Subnet
Final destination IP subnet IPCore Configuration