Digi TransPort WR41 - Page 278

Configuring network interfaces Configure ISDN interfaces
Digi TransPort® Routers User Guide
278
Command line
Command Instance Parameter Values
Equivalent web
parameter
ppp 0 name Free text field Description:
ppp 0 cingnb number ending with
ppp 0 msn number with ISDN MSN ending
with
ppp 0 sub number with ISDN sub-address
ending with
ppp 0 ipaddr IP address Local IP Address:
ppp 0 mask Network mask Mask:
ppp 0 ipmin IP address Assign remote IP
addresses from a.b.c.d
to a.b.c.d
ppp 0 iprange 1-255 Assign remote IP
addresses from a.b.c.d
to a.b.c.d
ppp 0 dnsserver IP address Primary DNS server:
ppp 0 secdns IP address Secondary DNS server:
ppp 0 do_nat 1 Enable NAT on this
interface
IP Address:
ppp 0 do_nat 2 Enable NAT on this
interface
IP address and Port:
ppp 0 ipsec 1 Enable IPsec on this
interface
ppp 0 ipsec 2 Keep Security
Associations (SAs) when
this ISDN interface is
disconnected
ppp 0 ipsecent Default,Ethernet,PPP Use interface X, Y for
the source IP address
of IPsec packets
ppp 0 ipsecadd number Use interface X, Y for
the source IP address
of IPsec packets
ppp 0 firewall on/off Enable the firewall on
this interface