Digi TransPort WR41 - Page 709

Configuring system settings Set device identity parameters
Digi TransPort® Routers User Guide
709
Router Identity
A string of up to 20 characters that identify the router in email alert messages generated by
the event logger. This string also serves as the prompt string during a remote login. The
factory configuration uses the character sequence %s. This sequence is replaced by the serial
number of the router when the unit identity is displayed. You can use this character sequence
when creating a custom identity for the router. For example, if the serial number of the router
is 012345, entering the string My_Router_%s> would show the prompt My_Router_012345>
during a remote login.
Hostname
Assigns a hostname of up to 64 characters to the local IP address of the router.
Secondary Hostname
Assigns a second hostname of up to 64 characters to a router. This is associated with the
secondary IP address.
3. Click Apply.
Command line
Command Instance Parameter Values
Equivalent web
parameter
snmp n Name Free text field up to 64
characters
Description
snmp n Contact Free text field Contact
snmp n Location Free text field Location
cmd n Unitid Free text field Router Identity
cmd n Hostname Free text field up to 64
characters
Hostname
cmd n sec_hostname Free text field up to 64
characters
Secondary
Hostname