Digi WI-700 - Page 282

HI, MI, WI-700 service manual - 7 – fault finding
7-16 Issue 9 04/2020
From the Ping request, one of the two screens below will appear.
On the left is a successful
communication to the
labeller from the console
with a reply back from
192.168.0.1
On this screen the
communication has failed
(timed out) – check all
hardware for fault
• Power reset the la-
beller board
• Check indication
lights on hub and
labeller board
• Check Ethernet
connection plugs on
main board, hub &
labeller board.