Digi WI-700 - Page 291

HI, MI, WI-700 service manual - 8 – recommended spare parts
8-7 Issue 9 04/2020
Conveyors - WI-700
B558-711-A4 Drive roller assembly
B558-712-A4 Idler roller assembly
565-732 Conveyor timing belt
565-742 Timing belt (infeed/outfeed motor drive belt)
565-741 Timing belt (scale motor drive belt)
MB1-00036 Bearing for drive shaft (2 required for each shaft)
MS0-00007 Seal for drive shaft bearing (2 required for each shaft)
MB0-00034 Plastic flange bearing (plastic bush in conveyor pulleys)
MM8-00017 Low friction tape (used on conveyor decks)
562-469 Collar AD (tracking strip guide collar for solid belts)
ES1-00063 Limit switch (under each conveyor)
Note: if infeed and outfeed drive belts assembly parts are evo type, refer to HI-700 drive assembly
parts on previous page
Split , green, elastic
150mm wide belt
Set of 2
422mm
length
475mm
length
650mm
length
900mm
length
562-712 562-713 562-726 562-714
Split , blue, elastic
150mm wide belt
Set of 2
422mm
length
475mm
length
650mm
length
900mm
length
563-147 563-148 ——— ———
Solid green, track
strip
344mm wide belt
422mm
length
475mm
length
650mm
length
900mm
length
——— ——— 562-641 562-642
Solid blue, track
strip
344mm wide belt
422mm
length
475mm
length
650mm
length
900mm
length
562-752 562-753 562-754 563-196
NOTE: the conveyor belts are essential recommended parts, select the belts for required conveyors
If belt option is not shown, refer to WI-700 parts manual