Digi WI-700 - Page 290

HI, MI, WI-700 service manual - 8 – recommended spare parts
8-6 Issue 9 04/2020
Conveyors - MI-700
B568-734 Drive roller assembly
B568-735 Idler roller assembly
565-732 Conveyor timing belt
565-742 Timing belt (infeed/outfeed motor drive belt)
565-741 Timing belt (scale motor drive belt)
MB1-00036 Bearing for drive shaft (2 required for each shaft)
MS0-00007 Seal for drive shaft bearing (2 required for each shaft)
562-245 Drive shaft (for infeed and outfeed conveyors)
562-208 Drive shaft (for scale conveyor)
MB0-00034 Plastic flange bearing (plastic bush in conveyor pulleys)
MM8-00017 Low friction tape (used on conveyor decks)
562-469 Collar AD (tracking strip guide collar for solid belts)
ES1-00063 Limit switch (under each conveyor)
Note: if infeed and outfeed drive belts assembly parts are evo type, refer to HI-700 drive assembly
parts on previous page
Split , green, elastic
100mm wide belt
Set of 2
422mm
length
475mm
length
650mm
length
900mm
length
1320mm
length
562-215 562-201 562-367 562-216 562-238
Split , blue, elastic
100mm wide belt
Set of 2
422mm
length
475mm
length
650mm
length
900mm
length
562-986 562-929 562-643 562-692
Solid green -
track strip
230mm wide belt
422mm
length
475mm
length
650mm
length
900mm
length
562-621 562-622 562-623 562-624
Solid , blue,
elastic
230mm wide belt
422mm
length
475mm
length
650mm
length
900mm
length
562-773 562-774 562-775 562-776
NOTE: the conveyor belts are essential recommended parts, select the belts for required conveyors
If belt option is not shown, refer to MI-700 parts manual